AZ31镁合金薄板经不同累积应变的连续弯曲变形后的显微组织与成形性能

对AZ31镁合金板材进行不同累积应变的连续弯曲变形及退火处理,随后对显微组织与力学性能的变化进行了研究。结果表明:经不同累积应变的连续弯曲变形后,镁合金板材的显微组织中没有发现孪晶,退火后,板材表层的晶粒异常长大,粗晶层的厚度随着累积应变的增加而增加,并且镁合金板材的织构朝RD方向偏转,偏转角度随累积应变的增加而增大;与原始板材相比,连续弯曲变形及退火处理使镁合金板材呈现出较好的室温成形性能(杯突值由2.3 mm提高到4.9 mm,提高了~113%),这主要归因于基面织构的改善使镁合金板材的r值减小与n值增大。     

蓝莓溃疡病生防链霉菌CX3的抑菌效果及其鉴定

[目的]为了明确从吉林省长白山保护区池西保护站马鞍山云杉人工林林下土壤分离,所获得1株拮抗菌株(编号记为CX3)的生防效果及分类地位。[方法]分别采用平板对峙法和杯碟法测定该菌株活菌及其发酵液的抑菌活性和抑菌谱;并通过形态学、生理生化特征、16S rRNA序列分析等方法研究了其分类地位。[结果]该菌株对13种供试植物病原菌均有抑制作用,抑菌谱广,其中对蓝莓溃疡病菌有极强的抑制作用,抑菌带达25.91 mm,发酵液的抑菌圈直径达31.73 mm;根据其菌株形态、生理生化特性、16S rRNA序列比对,最终鉴定菌株为链霉菌属Streptomyces sp.。[结论]该菌株对蓝莓溃疡病菌有显著的抑制效果,应用开发前景良好,此次是国内首次报道该菌株杀真菌活性。     

塑料薄膜材料在微藻培养环境中的稳定性和生物附着行为

考察了6种薄膜材料在次氯酸钠(NaClO)溶液、HCl溶液(pH=2)和NaOH溶液(pH=12)中的稳定性及其在普通小球藻培养体系中的生物附着行为。结果表明，聚氯乙烯(PVC)在3种溶液中浸泡后420 nm处的透光率下降约50%，聚氨酯(PU)在NaClO溶液中、乙烯?醋酸乙烯酯(EVA)在NaOH溶液中浸泡后420 nm处的透光率下降10%?15%，聚乙烯(PE)、聚丙烯(PP)和聚对苯二甲酸乙二醇酯(PET)在3种溶液中浸泡后的透光率没有明显变化；6种薄膜材料在普通小球藻培养体系中均有微藻明显附着，浸泡7 d后透光率明显下降，其中PVC表面附着最严重，浸泡7 d后透光率接近0，附着物量随浸泡时间延长而增加，浸泡45 d后达3069 ?g/cm2；其它5种薄膜表面附着物量先增加后降低，PU和EVA在第15 d时、PE, PP和PET在第30 d时附着物量最大，分别为292, 375, 292, 194和236 ?g/cm2。     

Calorimetric study of ytterbium orthovanadate YbVO4 polycrystalline ceramics

The heat capacity of ytterbium orthovanadate was first measured by adiabatic calorimetry in the temperature range T?=?12.28–344.06?K. No obvious anomalies were observed on the curve obtained. The values of standard thermodynamic functions in the temperature range T?=?0–400 K were calculated. Based on low-temperature calorimetry data obtained, previously published data on the high-temperature heat capacity of ytterbium orthovanadate were corrected. The anomalous contribution to heat capacity for YbVO₄ was compared with the data known for YbPO₄.     

Synthesis and properties of (Hf1-xTax)C solid solution carbides

Thermodynamically stable (Hf_1–xTa_x)C (x?=?0.1–0.3) compositions were selected by First Principle Calculation and synthesized in nanopowders via high-energy ball milling and carbothermal reduction of commercial oxides at 1450?°C. The formation of a solid solution during powder synthesis was investigated. The solid solution carbide powders were sintered at 1900?°C by spark plasma sintering without a sintering aid. As a result, the (Hf_1–xTa_x)C solid solution carbides exhibited high densities, excellent hardness and fracture toughness (ρ: 98.7–100.0%, HVN: 19.69–19.98?GPa, K_IC: 5.09–5.15?MPa?m^1/2) compared with previously reported HfC and HfC–TaC solid solution carbides.     

Hydrogen production through dry reforming of biogas using a porous electrochemical cell: Effects of a cobalt catalyst in the electrode and mixing of air with biogas

This paper reports the performance of porous Gd-doped ceria (GDC) electrochemical cells with Co metal in both electrodes (cell No. 1) and with Ni metal in the cathode and Co metal in the anode (cell No. 2) for CO₂ decomposition, CH₄ decomposition, and the dry reforming reaction of a biogas with CO₂ gas (CH₄ + CO₂ → 2H₂ + 2CO) or with O₂ gas in air (3CH₄ +?1.875CO₂ +?1.314O₂ → 6H₂ +?4.875CO +?0.7515O₂). GDC cell No. 1 produced H₂ gas at formation rates of 0.055 and 0.33?mL-H₂/(min?m²-electrode) per 1?mL-supplied gas/(min?m²-electrode) at 600?°C and 800?°C, respectively, by the reforming of the biogas with CO₂ gas. Similarly, cell No. 2 produced H₂ gas at formation rates of 0.40?mL-H₂/(min?m²) per 1?mL-supplied gas/(min?m²) at 800?°C from a mixture of biogas and CO₂ gas. The dry reforming of a real biogas with CO₂ or O₂ gas at 800?°C proceeded thermodynamically over the Co or Ni metal catalyst in the cathode of the porous GDC cell. Faraday's law controlled the dry reforming rate of the biogas at 600?°C in cell No. 2. This paper also clarifies the influence of carbon deposition, which originates from CH₄ pyrolysis (CH₄ → C + 2H₂) and disproportionation of CO gas (2CO → C + CO₂), on the cell performance during dry reforming. The dry reforming of a biogas with O₂ molecules from air exhibits high durability because of the oxidation of the deposited carbon by supplied air.     

Preparation of nanocrystalline MoSi2 with enhanced lithium storage by sol–gel and carbonthermal reduction method

Herein nanocrystalline MoSi₂ with enhanced lithium storage was successfully synthesized via a sol-gel and carbonthermal reduction method. Reduction of the gel mixture of Mo precursor and Si precursor by carbon at a desired temperature resulted in the formation of MoSi₂ nanoparticles. The gel mixture was obtained through the hydrolysis of TEOS and ammonium molybdate and the polymerization of hydrolysis products of TEOS. The reducing agent carbon was produced via decarburition of sucrose's hydrolysis products, which have been wrapped in the gel during its formation process. Addition of HCl to the mixed solution controlled the hydrolysis and polymerization rate, and enabled the formation of a gel mixture with homogeneously distributed hydrolysis products of ammonium molybdate, TEOS and sucrose. This achievement likely generates a novel route to synthesize non-oxide compounds such as silicide, carbide through the sol–gel and carbonthermal reduction process. In addition, the as-received MoSi₂ nanoparticles showed considerable activities in the reversible lithiation and delithiation process. When using as an anode for Li-ion batteries, MoSi₂ nanoparticles delivered a specific capacity of 325 mAh g^?1 at C/12 and showed an increasing capacity with cycling.     

CO2 laser-assisted preparation of transparent Eu2Ti2O7 thin films

We present a laser-assisted preparation of transparent europium-titanate Eu₂Ti₂O₇ thin films with tailored structural and optical properties. We have evaluated the effects of the irradiation time on the structural and the optical properties of the films. This approach allows the preparation of nanocrystalline crack-free films and micro patterns. The amorphous thin films were prepared by a sol-gel method. The films were annealed by a CO₂ laser beam for various time intervals. The laser irradiation induced a crystallization process that resulted in the formation of Eu₂Ti₂O₇ nanocrystals. The nanocrystals regularly grew with increasing irradiation time reaching the size from 25?nm to 45?nm. A film of a thickness 480?nm exhibited an optical transmission of 91.9% that is close to the maximal theoretical limit. The film's refractive index at 632?nm was 2.26. A micrometric pattern was prepared by a direct laser writing followed by a wet chemical etching. Feasibility of the demonstrated approach, together with the high film's quality, and europium-titanate chemical resistivity open up many opportunities for advanced applications. The approach can be used for a preparation of protective coatings and integrated photonic devices such as planar optical waveguides and couplers.     

Green preparation of in situ Cr3C2 nano-coatings on graphite surface and their water-wettability and rheological properties

Cr₃C₂ coatings were successfully prepared on the surface of graphite flakes via a molten salt route by mixing Cr powders with natural graphite flakes in a binary LiCl-KCl salt at 450–950?°C for 4–12?h. The phases and microstructures of the coatings were verified by its XRD/XPS spectra and SEM/AFM observations, respectively. Together with the dissolution/dispersion evidence of chromium powders after interaction with the salt, and the slightly increased particle sizes due to the formation of Cr₃C₂ coatings on graphite flakes, a ‘template-growth’ kinetic process was therefore proposed on the formation of such coatings in the molten salt. The resultant coatings decreased the contact angle between water and graphite from 101° to ~ 75° and lowered the apparent viscosities of graphite water slurry by two orders of magnitude accordingly, suggesting that the coatings will afford graphite with good processing abilities for carbon-water based materials.